FireKavach mounts on standard 35mm DIN rail — the same rail your MCBs, contactors, and terminal blocks use. Here's what electricians and facility teams need to know for a smooth installation.
4-12 way residential distribution boards — FireKavach Mini.
Combiner boxes and inverter-side panels — Mini or Macro depending on size.
Control/auxiliary compartments of LT/HT, MCC, PCC panels — typically Macro.
FireKavach is a DIN rail mounted fire suppression product designed to clip onto standard 35mm DIN rail used in electrical panels and DB boxes worldwide. It provides automatic, heat-activated fire suppression without electrical connections, making it suitable for retrofit into existing panels.
FireKavach should be installed by a qualified electrician as part of routine panel work, since it involves working inside an electrical enclosure. The device itself mounts mechanically onto the DIN rail with no wiring connections needed — but standard electrical safety precautions for working inside any panel should be followed by whoever performs the installation.
Yes — FireKavach can be installed both horizontally and vertically, depending on the orientation of the DIN rail within your specific electrical enclosure. This gives installers flexibility across different panel designs, since DIN rail orientation varies between DB boxes, ACDB/DCDB enclosures, and larger switchgear compartments.
FireKavach's installation is purely mechanical — a DIN rail clip-on with no wiring — so it does not inherently require de-energizing the panel. However, whether power is isolated during installation should follow the installing electrician's standard safety practices for working inside any live enclosure, in line with local electrical safety regulations.
For cramped DB boxes, FireKavach Mini's compact form factor — comparable to one or two standard DIN rail modules — is recommended.
The unit's ability to mount horizontally or vertically allows installers to fit it into available rail space without rearranging existing MCBs where possible. If a DB box is fully populated with no spare rail space, the electrician may need to assess whether the board can accommodate an extension or whether a slightly larger enclosure is needed during the next upgrade.
Yes — DIN rail mounted fire suppression like FireKavach is specifically suited to DB boxes and MCB boards because these enclosures universally use standard 35mm DIN rail for mounting MCBs. FireKavach occupies the same rail without requiring any changes to the existing wiring layout.
DIN rail mounted, no wiring required — order today, starting at ₹999.